Indigo Dealer Locator
Polyrepair - Waterproofing Solution
Available Pack sizes: 200gm, 500gm, 1Kg, 5Kg, 10Kg & 20Kg


It works both as a repairing and bonding agent as it bonds old & new concrete surfaces with plaster. It forms an impermeable barrier to prevent water penetration thereby making the repair patch water resistant and can be used for waterproofing of bathrooms & small terraces.


  • Excellent waterproofing characteristics
  • Increases flexural strength to prevent cracking
Technical Data Sheet

Surface preparation & application

    1. Economical waterproofing – Mix Indigo Polyrepair with cement in ratio of 1:2 by weight. Apply 2 coats of the mix by brush on concrete substrate in a span of 4-6 hrs. Cover the coating with screed to the desired thickness. Water curing is recommented
    2. As repair mortar & Renders – Mix Polyrepair at 7-8% by weight of cement, in 1:3 cement-fine sand mix for use as repair mortar along with required amount of water.
    3. As bond coat in repair – Mix Polyrepair with cement in 1:1 ratio by weight & apply 1 coat by brush on a pre-wetted substrate. Overlay repair mortar when the bond coat is tacky. Recoat again if tackiness is lost.

Readymade Colour Combinations