Sleek Interior Sanding Sealer
Available Pack sizes:500 ml, 1, 4 L

Sleek Sanding Sealer

Use this high-viscosity, quick-drying cellulose sealer to fill the grains in wood. For best results, use a Topcoat with single pack PU and melamine systems.


  • Quick drying
  • Better clarity

Surface preparation & application

    1. Sand the surface sequentially, along the grains with abrasive paper, grit 80-180.
    2. Remove dust and dirt.
    3. Apply 2-3 coats of Sealer, or enough coats for the wood pores to be filled.
    4. Allow for 2 hours of drying time between coats, then sand down with abrasive paper grit 220.
    5. Wipe clean and coat over with appropriate topcoat.

Readymade Colour Combinations