Home > Products > Sleek Wood Coatings > Interior Quick- Drying Two Pack PU
Interior Single Pack Clear PU Exterior Single Pack Clear PU Exterior Two Pack Clear PU Interior Two Pack Hi-Solid Melamine Interior Quick- Drying Two Pack PU Interior Sanding Sealer NC Anti Termite Solution NC / PU / Melamine Thinner Wood Stain Base
Sleek Interior Two Pack Quick-Drying PU
Available Pack sizes: 1 L

Sleek Interior Wood Coating

Sleek Interior Two Pack Quick-Drying PU is a reaction-cured, abrasion resistant system, including sealer & topcoat. It has been formulated to protect interior furniture and joinery from household chemicals to make sure it keeps looking new, with no harmful emission during curing.

Advantages

  • Quick drying
  • Reaction-cured
  • Resistance to scratches and household chemicals
  • Available in gloss, silk matt & matt finishes.

Surface preparation & application

    1. Clean the surface by wiping down with Sleek NC Thinner.
    2. Sand sequentially along the grains using abrasive paper grit no.60-180 and wipe clean as given above.
    3. In case you wish to change the colour of the substrate, apply 1-2 coats of Sleek Interior wood stain.
    4. For a closed grain finish, apply 2-3 coats of Sleek Interior Quick-Drying Two Pack PU Sealer. Allow 3-4 hours of drying time between coats. Carry out intercoat sanding using abrasive paper grit no.320.
    5. Apply 2 coats of Sleek Interior Quick-Drying Two Pack PU Topcoat with 3-4 hour interval between coats. Carry out intercoat sanding using abrasive paper grit no.400.

Readymade Colour Combinations

Decor Ideas