Available Pack sizes: 1 L
Sleek Two Pack Exterior PU
Use the power of a special film to guard your doors, windows and other woodwork from ultraviolet rays, rain as well as humidity. Apply this sealer and topcoat-based Polyurethane System for excellent results.
Surface preparation & application
- Sand surfaces sequentially along grains with abrasive paper grit no. 80-180.
- Remove dust and dirt.
- Apply 2-3 coats of Sleek Base Colour to extend topcoat life and prevent photo-degradation of the wood.
- Brush or spray-in base and hardener in the ratio 8:1, then apply 2 coats of Sleek XT 2 pack PU Topcoat.
- Allow for 6-8 hour drying time, sand with abrasive paper no 320, and wipe clean.
- Mix base and hardener in the ratio 8:1, then brush or spray on 2 coats of Sleek XT 2 pack PU Topcoat, allowing for 6-8 hours drying time between coats.
- Do inter-coat sanding using abrasive paper grit 400. Allow to dry overnight after second coat.
Readymade Colour Combinations