Available Pack sizes: 500 ml, 1 & 4 L

Francoat Satin Enamel

Francoat Satin enamel is formulated for wood, metal & masonry to give a smooth satin finish that lasts for years. Francoat Satin enamel offers excellent coverage and can be used on interior and exterior surfaces. It is available in select long-lasting colours and the paint film forms a tough layer that can be easily washed to retain that newly painted look.

Advantages

  • Smooth Satin Finish
  • Suitable for interior & exterior
  • Excellent hiding & coverage

Surface preparation & application

    1. Wipe the surface clean to make it free from dust, dirt, grease.
    2. Sand the surface with abrasive paper grit no. 180.
    3. Wipe clean and use an appropriate primer to prime the surface. For best results, allow drying time of 6-8 hours.
    4. Dents & imperfections can be filled using appropriate fillers which should then be sanded and primed again.
    5. One litre of Francoat Satin Enamel can be thinned down with 10-20% of good quality turpentine for brushing consistency or with 20-30% for spraying.
    6. Apply two coats of Francoat satin enamel giving an interval of 6-8 hours between coats.
WASHABILITY
NO
LOW
MEDIUM
HIGH

Readymade Colour Combinations

Blog

    GET IN TOUCH