Home

Not only are products from Indigo Paints different, but we have introduced products where none existed. Identifying and catering to niche, unique requirements of the customer has been in our DNA and products like Ceiling coat emulsion, Metallic emulsion, Floor Coat emulsion are just a few examples of how we have been trendsetters in the industry.

By dedicating ourselves to satisfying true customer needs, we set ourselves apart from other paint brands.

Emulsion Paints are water based paints which are more long-lasting when compared to distemper paint. Distempers are more conservative form of paint and has lesser durability than emulsions. Emulsions boasts of smoother finish as compared to distempers.

Indigo floor paint is a tough emulsion that is designed specially to protect and beautify cemented floors, interlock tiles, cement blocks etc. that are used on driveways & walkways. This paint is washable, and resistant to fungus and algae with good abrasion resistance to handle low to medium traffic. Indigo floor coat emulsion is available in a wide variety of non- fading shades to suit your needs.

Generally, the wear and tear to the existing coating or a special occasion or festival is what influences the frequency of painting. It can range from 3 – 8 years.

In case of interiors, the walls of the kitchen, kids’ rooms, and bathrooms tend to get dirty faster. The paint on the walls of bedrooms and living areas suffer less wear and tear.

In case of exteriors the level of exposure to the elements determines the life of the coating. Higher the exposure, greater will be the impact on the life of paint film.

Following the right painting practice and using the right product for the surface are critical in ensuring the best performance and life of any coating.

Putties and primes are the foundation to any topcoat.

Indigo Putties are generally paste like in consistency and designed to level out the undulations on the wall and create a smooth even surface.

Indigo primers are formulated mainly to improve the adhesion between the emulsion topcoat and the wall. However, there are specialized primers also in our range that are designed to address specific problems like the stain block primer that helps hide tough stains. You can refer our technical datasheet for more detailed information about our different products.

Usually, exterior walls exposed to sunlight, rain and dust will need washing before painting. You can use a scrapper / abrasive paper to remove the loose paint. Use a pressure wash and scrub with a wire brush to remove accumulated dirt, grease, algae, fungus, and moss growth. For Interior surfaces with oil, grease, or wax stains you can wash it away with a mild soap solution and a soft sponge. Please make sure that the walls are dry completely before starting the painting work.

Yes, but depending on the condition of the previous coating the surface will need to be prepared before applying the final paint. If the previous coating is in good condition, clean the surface to removes dust, and grease. In case the previous coating is glossy, sand using abrasive paper till the surface is dull and clean the surface. If the previous coating is in bad condition, remove the loose / flaky paint using an abrasive paper, use pressure wash and scrub with a wire brush to remove algae, fungus, and moss growth. Fill the cracks / dents, if required, with Indigo Acrylic Wall Putty. Apply one coat of Indigo Wall Primer, followed by 2 coats of Indigo Wall Paint keeping 4-6 hours interval between coats.

Normally three methods are used to apply paint on walls – by brush, roller and spray gun. The paint needs to be diluted to the right consistency while choosing any of the above methods. Application by roller is the most common method used while applying wall paint.

Washable Paint helps to keep your walls fresh and clean by offering the ability to clean dirt, stains etc. without affecting the paint film. Washable Wall Paints are very easy to clean with mild soap solution and a soft sponge. Wall Paints that have high emulsion content, a component that gives the paint higher wet scrub resistance, will have a better washability and durability.

Wall Paints are mainly categorised as Cement paints, Distempers, Emulsions and Oil Paints (Enamels) which can be applied either on Interior or Exterior walls. Wall paints comes in various finishes such as Matt, Soft Sheen, Hi-Sheen, Satin, Gloss and Hi-Gloss.